What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 21.06.2025 01:19

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
[old diagram got deleted by accident]
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
At least they know the answer if they wanted it.
There are two important concepts here.
the problem then depends on "how fast does the fuse operate?".
I post the exact comment here.
He then asserts :
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Why cant I stop thinking about counsellor between sessions?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
It seems Mohan does not understand the difference between a comment and an Answer.
In schematic diagrams this is the symbol for a fuse:
The third is lightning and “how it gets conducted into a home.”
but this device (an Inductor) … impedes the rapid changes in the current.
Upvotes:
So, the voltage could go up to 500 volts, and the fuse will not open up.
(Dc diagram shown, AC is similar).
First Sentence:
Because the load is inductive, the current lags the voltage.(by a bit).
These devices are installed between the “hot” and “neutral” and protective ground.
This is 'the assistant's answer'
Japanese culture: Is it true adult adoption is common in Japan?
But… the neutral is now “floating” because of the 1 ohm resistance.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
This device then solves the entire problem.
Why are people saying that Trump is fat when he is an athletic 6 foot 3 and 215 pounds?
a photo is worth a thousand words.
He then describes Rainy Season and Lightning.
nine
Has anyone ever made you take off your shirt?
At one ohm, the resistor has a maximum of 1 watt power.
This one hit behind the barn.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Diddy Trial's Most Disturbing Claims: Week Six Breakdown - TooFab
For this case there are devices called Metal oxide varistors (MOV).
Can the fuse protect the electronic devices from lightning instead of a surge protector.
These are simplified answers to the original question, and does not change anything I wrote above.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
It also is a device that limits the change in current flow.
The bolt then partially travels down the line to your home.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
What is lightning?
One
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–10–10[John johnson John Johnson ]
[image of Common-mode choke]
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
But it can get overloaded, and no longer works.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Now when you have a certain ac resistance, then a current flows in a loop.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
what exactly is a ‘surge’ protector?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
There are three different concepts here that are getting confused.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Edit 2024–10.
so, what happens?
He then describes the function of a fuse.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
The MOV will conduct when the voltage exceeds 50% of line voltage.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
2024–10–14 [Omar Gharbi Omar Gharbi ]
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
One is “what exactly is in a ‘surge protector’ ? ”
This is where the MOV conducts again, and dissipated the energy.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
but I think this circuit , shows a few more pieces.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
An AC voltage/ current source, and an ac inductive load.
Here is a simplified AC power diagram.
A circuit breaker is similar, but is resettable.
A fuse is a non-resetable over current circuit protector.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
The other is “what does a “fuse” do?”
What does a fuse do?
2024–10–16 [ OO OLAOYE OYEBODE ]
eight
Barnstars: